Recently Viewed

HSS Long Drill Bits

Page 1 of 1:    9 Items

3.0mm x 100mm Long Series Ground Jobber Drill Pack of 2

3.0mm x 100mm Long Series Ground Jobber Drill Pack of 2GLST030

In stock  In stock

For drilling accurate deep holes in most steels. 118° tip cutting angle. Produced according to DIN340 standard. Parallel shank bit for use in hand-held rotary drills or bench/pillar drills with a 3-Jaw drill chuck. Suitable for drilling holes in steel, high tensile steel up to 900N/mm², cast steel, cast iron, non-ferrous metals and hard plastics

 

3.5mm x 112mm Long Series Ground Jobber Drill Pack of 2

3.5mm x 112mm Long Series Ground Jobber Drill Pack of 2GLST035

In stock  In stock

For drilling accurate deep holes in most steels. 118° tip cutting angle. Produced according to DIN340 standard. Parallel shank bit for use in hand-held rotary drills or bench/pillar drills with a 3-Jaw drill chuck. Suitable for drilling holes in steel, high tensile steel up to 900N/mm², cast steel, cast iron, non-ferrous metals and hard plastics

 

4.0mm x 119mm Long Series Ground Jobber Drill

4.0mm x 119mm Long Series Ground Jobber DrillGLS040

In stock  In stock

For drilling accurate deep holes in most steels. 118° tip cutting angle. Produced according to DIN340 standard. Parallel shank bit for use in hand-held rotary drills or bench/pillar drills with a 3-Jaw drill chuck. Suitable for drilling holes in steel, high tensile steel up to 900N/mm², cast steel, cast iron, non-ferrous metals and hard plastics

 

4.5mm x 126mm Long Series Ground Jobber Drill Pack of 2

4.5mm x 126mm Long Series Ground Jobber Drill Pack of 2GLST045

In stock  In stock

For drilling accurate deep holes in most steels. 118° tip cutting angle. Produced according to DIN340 standard. Parallel shank bit for use in hand-held rotary drills or bench/pillar drills with a 3-Jaw drill chuck. Suitable for drilling holes in steel, high tensile steel up to 900N/mm², cast steel, cast iron, non-ferrous metals and hard plastics

 

5.0mm x 132mm Long Series Ground Jobber Drill Pack of 2

5.0mm x 132mm Long Series Ground Jobber Drill Pack of 2GLST050

In stock  In stock

For drilling accurate deep holes in most steels. 118° tip cutting angle. Produced according to DIN340 standard. Parallel shank bit for use in hand-held rotary drills or bench/pillar drills with a 3-Jaw drill chuck. Suitable for drilling holes in steel, high tensile steel up to 900N/mm², cast steel, cast iron, non-ferrous metals and hard plastics

 

6.0mm x 139mm Long Series Ground Jobber Drill Pack of 2

6.0mm x 139mm Long Series Ground Jobber Drill Pack of 2GLST060

In stock  In stock

For drilling accurate deep holes in most steels. 118° tip cutting angle. Produced according to DIN340 standard. Parallel shank bit for use in hand-held rotary drills or bench/pillar drills with a 3-Jaw drill chuck. Suitable for drilling holes in steel, high tensile steel up to 900N/mm², cast steel, cast iron, non-ferrous metals and hard plastics

 

7.0mm x 156mm Long Series Ground Jobber Drill

7.0mm x 156mm Long Series Ground Jobber DrillGLS070

In stock  In stock

For drilling accurate deep holes in most steels. 118° tip cutting angle. Produced according to DIN340 standard. Parallel shank bit for use in hand-held rotary drills or bench/pillar drills with a 3-Jaw drill chuck. Suitable for drilling holes in steel, high tensile steel up to 900N/mm², cast steel, cast iron, non-ferrous metals and hard plastics

 

8.0mm x 165mm Long Series Ground Jobber Drill

8.0mm x 165mm Long Series Ground Jobber DrillGLS080

In stock  In stock

For drilling accurate deep holes in most steels. 118° tip cutting angle. Produced according to DIN340 standard. Parallel shank bit for use in hand-held rotary drills or bench/pillar drills with a 3-Jaw drill chuck. Suitable for drilling holes in steel, high tensile steel up to 900N/mm², cast steel, cast iron, non-ferrous metals and hard plastics

 

10.0mm x 184mm Long Series Ground Jobber Drill

10.0mm x 184mm Long Series Ground Jobber DrillGLS100

In stock  In stock

For drilling accurate deep holes in most steels. 118° tip cutting angle. Produced according to DIN340 standard. Parallel shank bit for use in hand-held rotary drills or bench/pillar drills with a 3-Jaw drill chuck. Suitable for drilling holes in steel, high tensile steel up to 900N/mm², cast steel, cast iron, non-ferrous metals and hard plastics

 
     
  Export / Trade Partners

   The Power Tool Accessory Specialist       Contact Us | Online Catalogue Jobs

         Create Account  |  Sign In