14.0mm x 108mm Blacksmith DrillBLK140

In stock

• 118º Tip Cutting Angle
• 12.7mm Reduced Parallel Shank Bit
• Large Diameter Bits with Smaller Shanks to Enable Use in Standard Drill Chucks. 
• For Drilling Steel, Cast Iron, Non-ferrous Metal and Plastic
• Manufactured to DIN338 Standard
• Display Packed

15.0mm x 114mm Blacksmith DrillBLK150

In stock

• 118º Tip Cutting Angle
• 12.7mm Reduced Parallel Shank Bit
• Large Diameter Bits with Smaller Shanks to Enable Use in Standard Drill Chucks. 
• For Drilling Steel, Cast Iron, Non-ferrous Metal and Plastic
• Manufactured to DIN338 Standard
• Display Packed

16.0mm x 120mm Blacksmith DrillBLK160

In stock

• 118º Tip Cutting Angle
• 12.7mm Reduced Parallel Shank Bit
• Large Diameter Bits with Smaller Shanks to Enable Use in Standard Drill Chucks. 
• For Drilling Steel, Cast Iron, Non-ferrous Metal and Plastic
• Manufactured to DIN338 Standard
• Display Packed

17.0mm x 125mm Blacksmith DrillBLK170

In stock

• 118º Tip Cutting Angle
• 12.7mm Reduced Parallel Shank Bit
• Large Diameter Bits with Smaller Shanks to Enable Use in Standard Drill Chucks. 
• For Drilling Steel, Cast Iron, Non-ferrous Metal and Plastic
• Manufactured to DIN338 Standard
• Display Packed

18.0mm x 130mm Blacksmith DrillBLK180

In stock

• 118º Tip Cutting Angle
• 12.7mm Reduced Parallel Shank Bit
• Large Diameter Bits with Smaller Shanks to Enable Use in Standard Drill Chucks. 
• For Drilling Steel, Cast Iron, Non-ferrous Metal and Plastic
• Manufactured to DIN338 Standard
• Display Packed

19.0mm x 135mm Blacksmith DrillBLK190

In stock

• 118º Tip Cutting Angle
• 12.7mm Reduced Parallel Shank Bit
• Large Diameter Bits with Smaller Shanks to Enable Use in Standard Drill Chucks. 
• For Drilling Steel, Cast Iron, Non-ferrous Metal and Plastic
• Manufactured to DIN338 Standard
• Display Packed

20.0mm x 140mm Blacksmith DrillBLK200

In stock

• 118º Tip Cutting Angle
• 12.7mm Reduced Parallel Shank Bit
• Large Diameter Bits with Smaller Shanks to Enable Use in Standard Drill Chucks. 
• For Drilling Steel, Cast Iron, Non-ferrous Metal and Plastic
• Manufactured to DIN338 Standard
• Display Packed

22.0mm x 220mm Blacksmith DrillBLK220

In stock

• 118º Tip Cutting Angle
• 12.7mm Reduced Parallel Shank Bit
• Large Diameter Bits with Smaller Shanks to Enable Use in Standard Drill Chucks. 
• For Drilling Steel, Cast Iron, Non-ferrous Metal and Plastic
• Manufactured to DIN338 Standard
• Display Packed

25.0mm x 237mm Blacksmith DrillBLK250

In stock

• 118º Tip Cutting Angle
• 12.7mm Reduced Parallel Shank Bit
• Large Diameter Bits with Smaller Shanks to Enable Use in Standard Drill Chucks. 
• For Drilling Steel, Cast Iron, Non-ferrous Metal and Plastic
• Manufactured to DIN338 Standard
• Display Packed