Drill Bits | Drilling
Comprehensive high performance drill bit range for drilling across a wide range of materials. Available in various lengths and diameters depending on the type of material you are drilling or the size hole required.
Recently Viewed
1.0mm x 35mm Cobalt Ground Jobber Drill Pack of 10TCJ010

1.0mm x 35mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
1.5mm x 40mm Cobalt Ground Jobber Drill Pack of 10TCJ015

1.5mm x 40mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
2.0mm x 49mm Cobalt Ground Jobber Drill Pack of 10TCJ020

2.0mm x 49mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
2.5mm x 53mm Cobalt Ground Jobber Drill Pack of 10TCJ025

2.5mm x 53mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
3.0mm x 61mm Cobalt Ground Jobber Drill Pack of 10TCJ030

3.0mm x 61mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
3.3mm x 65mm Cobalt Ground Jobber Drill Pack of 10TCJ033

3.3mm x 65mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
3.5mm x 70mm Cobalt Ground Jobber Drill Pack of 10TCJ035

3.5mm x 70mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
4.0mm x 75mm Cobalt Ground Jobber Drill Pack of 10TCJ040

4.0mm x 75mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
4.2mm x 75mm Cobalt Ground Jobber Drill Pack of 10TCJ042

4.2mm x 75mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
4.5mm x 80mm Cobalt Ground Jobber Drill Pack of 10TCJ045

4.5mm x 80mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
5.0mm x 86mm Cobalt Ground Jobber Drill Pack of 10TCJ050

5.0mm x 86mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
5.5mm x 93mm Cobalt Ground Jobber Drill Pack of 10TCJ055

5.5mm x 93mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
6.0mm x 93mm Cobalt Ground Jobber Drill Pack of 10TCJ060

6.0mm x 93mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
6.5mm x 101mm Cobalt Ground Jobber Drill Pack of 10TCJ065

6.5mm x 101mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
6.8mm x 101mm Cobalt Ground Jobber Drill Pack of 10TCJ068

6.8mm x 101mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
7.0mm x 109mm Cobalt Ground Jobber Drill Pack of 10TCJ070

7.0mm x 109mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
7.5mm x 109mm Cobalt Ground Jobber Drill Pack of 10TCJ075

7.5mm x 109mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
8.0mm x 117mm Cobalt Ground Jobber Drill Pack of 10TCJ080

8.0mm x 117mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
8.5mm x 117mm Cobalt Ground Jobber Drill Pack of 10TCJ085

8.5mm x 117mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
9.0mm x 125mm Cobalt Ground Jobber Drill Pack of 10TCJ090

9.0mm x 125mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
9.5mm x 125mm Cobalt Ground Jobber Drill Pack of 10TCJ095

9.5mm x 125mm Cobalt Ground Jobber Drill Pack of 10

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
10.0mm x 133mm Cobalt Ground Jobber Drill Pack of 5TCJ100

10.0mm x 133mm Cobalt Ground Jobber Drill Pack of 5

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
10.2mm x 133mm Cobalt Ground Jobber Drill Pack of 5TCJ102

10.2mm x 133mm Cobalt Ground Jobber Drill Pack of 5

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
10.5mm x 133mm Cobalt Ground Jobber Drill Pack of 5TCJ105

10.5mm x 133mm Cobalt Ground Jobber Drill Pack of 5

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
11.0mm x 142mm Cobalt Ground Jobber Drill Pack of 5TCJ110

11.0mm x 142mm Cobalt Ground Jobber Drill Pack of 5

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
11.5mm x 142mm Cobalt Ground Jobber Drill Pack of 5TCJ115

11.5mm x 142mm Cobalt Ground Jobber Drill Pack of 5

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
12.0mm x 151mm Cobalt Ground Jobber Drill Pack of 5TCJ120

12.0mm x 151mm Cobalt Ground Jobber Drill Pack of 5

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
12.5mm x 151mm Cobalt Ground Jobber Drill Pack of 5TCJ125

12.5mm x 151mm Cobalt Ground Jobber Drill Pack of 5

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
13.0mm x 151mm Cobalt Ground Jobber Drill Pack of 5TCJ130

13.0mm x 151mm Cobalt Ground Jobber Drill Pack of 5

In stock  In stock
  • 135º Split Point Tip for Easy Drill Start Drill without Skidding
  • M35 (5% Cobalt) High Speed Steel, these bits are Heat and Wear Resistant
  • For Drilling Hard Steel and Tough Materials
  • Manufactured to DIN338 standard
  • Packed in Plastic Tube
 
 About Us    Contact    Sign In